The new SENSA i sets new standards for configuration, safety, comfort and ease of use. It continues the tradition of LiKAMED quality in a new design marked by complete flexibility. In addition to its outstanding quality, close attention has been paid to the comfort of patients and users, as shown by the wide selection of configurable equipment options.
The modular design allows you to assemble the chair exactly as you need it. You configure your chair precisely to your individual requirements with different function groups such as casters, covers, armrests, upholsteries and much more.
Set the chair to any desired position. Depending on the adjustment options and the installed options, the SENSA i chair comes with three, four or five drives. You can configure your chair to select whether it moves the patient into the shock position or the Trendelenburg position in case of emergency. In an emergency, the optional safe foot controller can be double-clicked to move the chair quickly and easily into the shock or the Trendelenburg position, depending on your configuration. At the same time, nursing personnel have their hands free for immediate action in case of emergency.
The firmness of this type of upholstery can be adjusted to suit the patient with internal air chambers. The air chambers in the back part and the seat part can be adjusted separately with the hand switch to make the patient as comfortable as possible. The dynamic adjustment options in the back part ensure that patients will be able to relax and change position during long treatment sessions. The ability to adjust the air chambers separately for patients of different weights is also a great advantage when treating a range of different patients.
|
Technical data SENSA i |
||
|
Armrests length x width x height full foam armrest pads |
60.5 cm x 13.5 cm x 4.5 cm |
|
|
|
foam armrest pads |
52.5 cm x 15.5 cm x 8.5 cm |
|
low wedge-shaped foam armrest pads |
52.5 cm x 15.5 cm x 6.5 to 9.5 cm |
|
|
high wedge-shaped foam armrest pads |
52.5 cm x 16.5 cm x 7.5 to 12.5 cm |
|
|
Upholstery length x width x height |
219 cm x 60 cm x 9 cm |
|
|
Total length (max.) x total width (max.) |
229 cm x 87 cm |
|
|
Floor clearance |
63 mm (casters Ø 7.5 cm) |
|
|
Seating height with height lift |
53 cm to 75 cm (casters Ø 7.5 cm) |
|
|
|
without height lift |
57 cm (casters Ø 7.5 cm) |
|
Height adjustment |
22 cm (optional) |
|
|
Angle of inclination back/seat/foot part |
0° to 72° (shock position model), |
|
|
|
back/seat/foot part in shock position |
0°/ 25°/ 27° |
|
back/seat/foot part in Trendelenburg position |
-12°/ 25°/ 27° |
|
|
Equipotential bonding terminal |
standard |
|
|
Power rating, primary |
100-240 V AC, 50/ 60 Hz |
|
|
Power rating, secondary |
29 V |
|
|
Fuses |
internal |
|
|
Protection type hand control unit / controller |
IP X6/IP X4 |
|
|
Protection class |
II |
|
|
Duty cycle |
2 min. ON/ 18 min. OFF or |
|
|
Consumption in standby |
< 2 W |
|
|
Electrical safety, EMC |
DIN EN 60601-1, 60601-1-2 |
|
|
Spiral power cable |
2.0 m to 3.5 m |
|
|
Permitted air pressure |
800 to 1,060 hPa |
|
|
Ambient temperature |
10° to 40° C |
|
|
Emission sound pressure level |
< 65 dB(A) |
|
|
Medical device class |
|
|
|
Applied parts type |
B (CF limit values in compliance) |
|
|
Safe working load |
250 kg |
|
|
Covers and metal frame colour |
light grey RAL 7047 |
|
|
Weight (depending on configuration) |
85 to 100 kg |
|
|
Guarantee |
2 years |
|
I